Office Wi‑Fi: where to start
Why one powerful router does not solve the problem, and how to plan a network that does not slow down at midday.

The most common mistake in office Wi‑Fi is the home approach: one powerful router in the corner. It works at home because there are few devices. In an office, dozens of laptops, phones, printers and video calls are connected at once, and the problem is no longer signal strength but how many devices one access point can serve without slowing down.
A proper design starts with a site survey. Wall materials, glass partitions, metal cabinets and neighbouring networks all affect coverage. An engineer places access points on the floor plan so that every workplace has a stable connection and the points do not interfere with each other.
Access points should be cabled and centrally managed. Then a person walking from the meeting room to their desk keeps the connection, and the administrator sees the whole network in one place. A network extended only with wireless repeaters usually halves the speed and is hard to troubleshoot.
For security, the guest network must be separated from the work network. A guest gets internet access but cannot see your servers, printers or accounting system. The same principle applies to cameras and other equipment.
Finally, Wi‑Fi cannot be faster than the network behind it. An old switch or poor cabling will limit even the newest access points. If your office internet slows down at midday or drops in the meeting room, a DataNet engineer can visit free of charge, measure coverage and propose a solution.
Let's build your system.
The engineer's visit and the preliminary estimate are free. We call back within 1 hour.